|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 1/8 MTP3403KN3 cystek product specification p-channel enhancement mode mosfet MTP3403KN3 bv dss -30v i d -3.3a r ds(on) @v gs =-10v, i d =-2.5a 63m (typ) r ds(on) @v gs =-4.5v, i d =-1.35a 100m (typ) r ds(on) @v gs =-4v, i d =-1.35a 114m (typ) features ? advanced trench process technology ? high density cell design for ultra low on resistance ? low gate charge ? compact and low profile sot-23 package ? pb-free & halogen-free package equivalent circuit outline absolute maximum ratings (ta=25 c) parameter symbol limits unit drain-source voltage v ds -30 v gate-source voltage v gs 20 v continuous drain current @v gs =-10v, t a =25 c (note 1) i d -3.3 a continuous drain current @v gs =-10v, t a =70 c (note 1) i d -2.6 a pulsed drain current (note 2) i dm -15 a maximum power dissipation p d 1.25 w linear derating factor 0.01 w/ c operating junction and storage temperature tj, tstg -55~+150 c note : 1. surface mounted on 1 in 2 copper pad of fr-4 board, t 10s; 270 c/w when mounted on minimum copper pad. 2. pulse width limited by maximum junction temperature. MTP3403KN3 sot-23 d s g gate g s source d drain
cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 2/8 MTP3403KN3 cystek product specification thermal performance parameter symbol limit unit thermal resistance, juncti on-to-ambient rth,ja 100 c/w note : surface mounted on 1 in2 copper pad of fr-4 board, t 10s; 270 c/w when mounted on minimum copper pad. electrical characteristics (tj=25 c, unless otherwise specified) symbol min. typ. max. unit test conditions static bv dss -30 - - i d =-1ma , v gs =0v bv dsx -15 - - i d =-1ma, v gs =20v v gs(th) -1 -1.7 -2 v v ds =v gs , i d =-250a i gss - - 10 v gs =20v, v ds =0 - - -1 v ds =-30v, v gs =0 i dss - - -5 a v ds =-30v, v gs =0, tj=55 c - 63 80 i d =-2.5a, v gs =-10v - 100 130 i d =-1.35a, v gs =-4.5v *r ds(on) - 114 150 m i d =-1.35a, v gs =-4v *g fs - 3.4 - s v ds =-5v, i d =-1.35a dynamic ciss - 550 - coss - 86 - crss - 63 - pf v ds =-15v, v gs =0, f=1mhz *t d(on) - 10 - *t r - 16 - *t d(off) - 20 - *t f - 10 - ns v ds =-15v, v gs =-4.5v, i d =-1a, r g =10 *qg - 7.6 - *qgs - 1.8 - *qgd - 2.8 - nc v ds =-15v, i d =-3.3a, v gs =-4.5v source-drain diode *i s - - -3.3 a *v sd - -0.76 -1.0 v v gs =0v, i sd =-1a *pulse test : pulse width 300s, duty cycle 2% ordering information device package shipping marking MTP3403KN3 sot-23 (pb-free) 3000 pcs / tape & reel k3403 cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 3/8 MTP3403KN3 cystek product specification typical characteristics typical output characteristics 0 3 6 9 12 15 012345 -v ds , drain-source voltage(v) -i d , drain current (a) -v gs =3v -v gs =2v -v gs =4v 10v, 9v, 8v, 7v, 6v, 5v brekdown voltage vs ambient temperature 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) -bv dss , normalized drain-source breakdown voltage i d =-250 a, v gs =0v static drain-source on-state resistance vs drain current 0 100 200 300 400 500 0.01 0.1 1 -i d , drain current(a) r ds(on) , static drain-source on-state resistance() -v gs =3v -v gs =10v -v gs =4.5v reverse drain current vs source-drain voltage 0.2 0.4 0.6 0.8 1 1.2 0 0.3 0.6 0.9 1.2 1.5 -i dr , reverse drain current (a) -v sd , source-drain voltage(v) tj=25c tj=150c v gs =0v static drain-source on-state resistance vs gate-source voltage 0 50 100 150 200 250 0246810 -v gs , gate-source voltage(v) r ds( on) , static drain-source on- state resistance(m) i d =-2.5a drain-source on-state resistance vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -60 -20 20 60 100 140 180 tj, junction temperature(c) r ds( on) , normalized static drain- source on-state resistance v gs =-10v, i d =-2.5a r ds( on) @ tj=25c : 63m cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 4/8 MTP3403KN3 cystek product specification typical characteristics(cont.) capacitance vs drain-to-source voltage 10 100 1000 0.1 1 10 100 -v ds , drain-source voltage(v) capacitance---(pf) c oss ciss crss threshold voltage vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 -60 -40 -20 0 20 40 60 80 100 120 140 160 tj, junction temperature(c) -v gs( th) , normalized threshold voltage i d =-250 a maximum safe operating area 0.001 0.01 0.1 1 10 100 0.01 0.1 1 10 100 -v ds , drain-source voltage(v) -i d , drain current (a) dc 10ms 100ms 1ms 100 s t a =25c, tj=150c, v gs =-10v, r ja =100c/w single pulse maximum drain current vs junctiontemperature 0 0.5 1 1.5 2 2.5 3 3.5 4 25 50 75 100 125 150 175 tj, junction temperature(c) -i d , maximum drain current(a) t a =25c, v gs =-10v, r ja =100c/w single pulse power rating, junction to ambient 0 4 8 12 16 20 0.001 0.01 0.1 1 10 100 pulse width(s) power (w) t j( max) =150c t a =25c r ja =100c/w gate charge characteristics 0 1 2 3 4 5 024681 qg, total gate charge(nc) -v gs , gate-source voltage(v) 0 i d =-3.3a v ds =-15v v ds =-24v cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 5/8 MTP3403KN3 cystek product specification typical characteristics(cont.) power derating curve 0 0.2 0.4 0.6 0.8 1 1.2 1.4 0 20 40 60 80 100 120 140 160 t a , ambient temperature() p d , power dissipation(w) surface mounted on fr-4 board with 1 in 2 pad area typical transfer characteristics 0 3 6 9 12 15 02468 -v gs , gate-source voltage(v) -i d , drain current (ma) -v ds =5v transient thermal response curves 0.001 0.01 0.1 1 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t 1 , square wave pulse duration(s) normalized transient thermal resistance single pulse 0.01 0.02 0.05 0.1 0.2 d=0.5 1.r ja (t)=r(t)*r ja 2.duty factor, d=t 1 /t 2 3.t jm -t a =p dm *z ja (t) 4.r ja =100 c/w cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 6/8 MTP3403KN3 cystek product specification reel dimension carrier tape dimension cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 7/8 MTP3403KN3 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface. cystech electronics corp. spec. no. : c865n3 issued date : 2012.08.08 revised date : page no. : 8/8 MTP3403KN3 cystek product specification sot-23 dimension *: typical dim inches h j k d a l g v c b 3 2 1 s style: pin 1.gate 2.source 3.drain marking: te 3-lead sot-23 plastic surface mounted package cystek package code: n3 k3403 millimeters inches millimeters min. max. min. max. dim min. max. min. max. a 0.1102 0.1204 2.80 3.04 j 0.0034 0.0070 0.085 0.177 b 0.0472 0.0630 1.20 1.60 k 0.0128 0.0266 0.32 0.67 c 0.0335 0.0512 0.89 1.30 l 0.0335 0.0453 0.85 1.15 d 0.0118 0.0197 0.30 0.50 s 0.0830 0.1161 2.10 2.95 g 0.0669 0.0910 1.70 2.30 v 0.0098 0.0256 0.25 0.65 h 0.0005 0.0040 0.013 0.10 notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material: ? lead: pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance . |
Price & Availability of MTP3403KN3 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |